Our First Banner
Sign in
Close
Register Contact Us Need help?
Call Us Toll Free In The USA:
1-888-681-9846
Compare up to 4 items:
  • compare item
  • compare item
  • compare item
  • compare item
3DR ArduCopter Quad-C Frame + Motors Kit

3DR ArduCopter Quad-C Frame + Motors Kit

$249.99
3DR ArduCopter Quad-C  Frame + Motors Kit contains the following:
  • 2 Main frame boards + PDB cap.
  • 5 Aluminum arms 
  • 2 Carrier boards 
  • Landing gear 
  • Power distribution board, power cables and signal cables for PDB-APM
  • All hardware needed to assemble the components above
  • 4 Motors
  • 4 ESCs
  • 4 Propellers
SKU SKU42
-
+
Quantity:
 item(s) available
50
Send to friend
e-mail this

3DR ArduCopter Quad-C  Fully featured UAV development platform.

This new ArduCopter frame design incorporates several new features. The landing gear is moved further apart making the quad more stable during takeoff and landing. They also allow a wider unobstructed field of view if you mount a camera beneath the main frame. The center platform is wider allowing more room to mount electronics in addition to the space in the stackup. The center platform also allows access to the PDB without the need to take apart the entire frame. The arms are strong enough to withstand a heavy impact. They extend past the motors to protect them in a sideways collision. The frame is designed to fit APM screw holes in any orientation. It fits the roll/tilt camera mount and the sonar mounting bracket. This kit is designed by 3D Robotics in San Diego, California and manufactured by 3D Robotics Tijuana, Mexico. 

Changes to Revision-C

*Shorter arms.

*Arms now come in blue and black.

*Motor mounting is no longer done with a bolt through the entire arm but now the motor just mounts to a single face of     the arm. This is to prevent the arm from sinking in.

*Kit now includes spare arm.

 
3DR ArduCopter Quad-C Frame+ Motors kit contains the following:
  • 2 Fiberglass Main frame boards + PDB cap
  • 5 Aluminum arms, 3 black arms and 2 blue arms
  • 2 Fiberglass Carrier boards
  • Fiberglass Landing gear
  • Power distribution board, power cables and signal cables for PDB-APM
  • All hardware needed to assemble the components above
  • 4 Motors ( either 850 Kv or 880 Kv - When using the 880Kv motors, one hole on the arm must be drilled out slightly larger, see assembly instructions )
  • 4 ESCs
  • 4 Propellers (either 10x47; or 11x47 )

The kit does NOT include:
  • ArduPilot Mega or any sensors

Overall Saticfaction

There have been no reviews for this product.

Be the first one to review this product!