Our First Banner
Sign in
Close
Register Contact Us Need help?
Call Us Toll Free In The USA:
1-888-681-9846
Compare up to 4 items:
  • compare item
  • compare item
  • compare item
  • compare item
3DR ArduCopter Quad-C Frame + Motors + Full Flight Electronics Kit

3DR ArduCopter Quad-C Frame + Motors + Full Flight Electronics Kit

$419.99
3DR ArduCopter Quad-C  Full Electronics Kit contains the following:
  • 2 Main frame boards + PDB cap.
  • 5 Aluminum arms 
  • 2 Carrier boards 
  • Landing gear 
  • Power distribution board, power cables and signal cables for PDB-APM
  • All hardware needed to assemble the components above
  • 4 Motors ( either 850 Kv or 880 Kv )
  • 4 ESCs
  • 4 Propellers (either 10x47; or 11x47 )
  • Ardupilot Mega 2.5, unassembled kit; with choice of conectors and GPS unit (Mediatek or uBlox)
SKU KT-AC3DR-03
-
+
Quantity:
 item(s) available
48
Send to friend
e-mail this
3DR ArduCopter Quad-C   Fully featured UAV development platform.

This new ArduCopter frame design incorporates several new features. The landing gear is moved further apart making the vehicle more stable during takeoff and landing. It provides a wider unobstructed field of view for mounting cameras under the vehicle. The center plate is removable, allowing access to the PDB without the need to take apart the entire frame. The arms are strong enough to withstand a heavy impacts. The top plate of the vehicle is designed to accommodate the APM in both + or x configurations. This kit is designed by 3D Robotics in San Diego, California and manufactured by 3D Robotics Tijuana, Mexico.

 

Changes to Revision-C

*Shorter arms.

*Arms now come in blue and black.

*Motor mounting is no longer done with a bolt through the entire arm but now the motor just mounts to a single face of     the arm. This is to prevent the arm from sinking in.

*Kit now includes spare arm.

*APM2.5 is now included with this kit.

 
 
3DR ArduCopter Quad-C  Frame + Motors + Full flight electronics kit contains the following:
  • 2 Fiberglass Main frame boards 
  • 5 Aluminum arms, 3 black arms and 2 blue arms
  • 2 Fiberglass Carrier boards
  • Fiberglass Landing gear
  • Power distribution board, power cables and signal cables for PDB-APM
  • All hardware needed to assemble the components above
  • 4 Motors ( either 850 Kv or 880 Kv - When using the 880Kv motors, one hole on the arm must be drilled out slightly larger, see assembly instructions )
  • 4 ESCs
  • 4 Propellers (either 10x47; or 11x47 )
  • Ardupilot Mega 2.5; with choice of conectors and GPS unit (Mediatek or uBlox)

Overall Saticfaction

There have been no reviews for this product.

Be the first one to review this product!