Our First Banner
Sign in
Close
Register Contact Us Need help?
Call Us Toll Free In The USA:
1-888-681-9846
Compare up to 4 items:
  • compare item
  • compare item
  • compare item
  • compare item
3DR ArduCopter Hexa-B Frame + Motors + Full Flight Electronics Kit

3DR ArduCopter Hexa-B Frame + Motors + Full Flight Electronics Kit

ArduCopter Hexa 3DR KIT, Electronics Contains the following:
  • 2 Fiberglass Main frame boards 
  • 7 Aluminum arms, 5 Black arms and 2 blue arms
  • 2 Fiberglass Carrier boards
  • Fiberglass Landing gear
  • Power distribution board, power cables and signal cables for PDB-APM
  • All hardware needed to assemble the components above
  • 6 Motors ( either 850 Kv or 880 Kv )
  • 6 ESCs
  • 6 Propellers (either 10x47; or 11x47 )
  • Ardupilot Mega 2.5, unassembled kit; with choice of conectors and GPS unit (Mediatek or uBlox)
SKU KT-ACH3DR-03
-
+
Quantity:
 item(s) available
1000
Send to friend
e-mail this
3DR ArduCopter Hexa-B - Fully featured UAV development platform.

This Hexacopter kit is based off the 3DR ArduCopter Quad. With two extra motors the lifting capacity is increased to over 1kg. The PDB still mounts neatly between the base plates but access to it is made easier by thumb nuts that easily unscrew to remove the stackup. This also lets you attach and remove APM with screws more easily. This kit is designed by 3D Robotics in San Diego, California and manufactured by 3D Robotics Tijuana, Mexico. 
 

Changes to Revision-B

*Shorter arms.

*Arms now come in blue and black.

*Motor mounting is no longer done with a bolt through the entire arm but now the motor just mounts to a single face of     the arm. This is to prevent the arm from sinking in.

*Kit now includes spare arm.

*Main frame plates are now larger to accommodate the shorter arms.

*Arms no longer need to be drilled out when using 880kv (orange) motors.

 

You can find more information about development status and more:
- DIY Drones main site
- ArduCopter forums
- ArduCopter development wiki
- ArduCopter issue tracker
- ArduCopter software downloads

 

ArduCopter Hexa 3DR KIT, Electronics Contains the following:
  • 2 Fiberglass Main frame boards 
  • 7 Aluminum arms, 5 Black arms and 2 blue arms
  • 2 Fiberglass Carrier boards
  • Fiberglass Landing gear
  • Power distribution board, power cables and signal cables for PDB-APM
  • All hardware needed to assemble the components above
  • 6 Motors ( either 850 Kv or 880 Kv )
  • 6 ESCs
  • 6 Propellers (either 10x47; or 11x47 )
  • Ardupilot Mega 2.5,; with choice of conectors and GPS unit (Mediatek or uBlox)

Overall Saticfaction

There have been no reviews for this product.

Be the first one to review this product!